DJI RoboMaster S1 Education Expansion Set (EP)
Original price was: $336.00.$96.99Current price is: $96.99.
- Shop with Ease
- Unbeatable quality, unbeatable prices.
- fast shipping
- Online assistance, always at your service.
The DJI RoboMaster S1 Education Expansion Set (EP) was built to take learning to the next level. This advanced educational robot provides an all-in-one solution for STEAM-based classrooms everywhere, offering AI and programming projects for students of all ages and experience levels.
Note: Product is shown in use for illustration only, additional equipment is not included.
Key Features of the DJI RoboMaster S1 Education Expansion Set (EP)
- Cutting-Edge Equipment & Technology
- Add Hardware, Unlock Creativity
- Real-World AI Implementation
- Software Programming Platform
- Custom Learning Materials
- Fun & Quick Competitions
- MPN – DJIROBOMASTERS1E
- GTIN – 190021023215
| Detection Range | 0.1-10 m |
|---|---|
| Energy | 25.92 Wh |
| Max Live View Bitrate | 6 Mbps |
| Operating Frequency [3] | 2.4 GHz, 5.1 GHz, 5.8 GHz |
| Operating Mode | Connection via Wi-Fi, Connection via Router |
| Max Transmission Distance [4] | Connection via Wi-Fi:FCC, 2.4 GHz 140 m, 5.8 GHz 90 mCE, 2.4 GHz 130 m, 5.8 GHz 70 mSRRC, 2.4 GHz 130 m, 5.8 GHz 90 mMIC, 2.4 GHz 130 mConnection via Router:FCC, 2.4 GHz 190 m, 5.8 GHz 300 mCE, 2.4 GHz 180 m, 5.8 GHz 70 mSRRC, 2.4 GHz 180 m, 5.8 GHz 300 mMIC, 2.4 GHz 180 m |
| Transmission Power (EIRP) | 2.400-2.4835 GHzFCC: ≤30 dBmSRRC: ≤20 dBmMIC: ≤20 dBm5.170-5.25 GHzFCC: ≤30 dBmSRRC: ≤23 dBmMIC: ≤23 dBm5.725-5.850 GHzFCC: ≤30dBmSRRC: ≤30dBm |
| Transmission Standard | IEEE802.11a/b/g/n |
| Capacity | 2400 mAh |
| Nominal Charging Voltage | 10.8 V |
| Maximum Charging Voltage | 12.6 V |
| Battery Type | LiPo 3S |
| Charging Temperature Range | 5 to 40 °C |
| Latency [2] | Connection via Wi-Fi: 80-100msConnection via Router: 100-120ms(unobstructed, free of interference) |
| Maximum Charging Power | 29 W |
| Battery Life In Use | 35 minutes (measured at a constant speed of 2 m/s on a flat surface) |
| Battery Life On Standby | Approx. 100 minutes |
| Voltage | 12.6 V |
| Rated Voltage | 28 W |
| App | RoboMaster |
| IOS | iOS 10.0.2 or later |
| Android | Android 5.0 or later |
| Recommended Routers | TP-Link TL-WDR8600; TP-Link TL-WDR5640 (China)TP-Link Archer C7; NETGEAR X6S (International) |
| Recommended Outdoor Power Supply Solution For Routers | Laptop Power Bank (match the input power of the router) |
| Live View Quality | 720p/30fps |
| Max Chassis Rotational Speed | 600°/s |
| FOV | 120° |
| Communication Port | CAN bus |
| Accuracy [1] | 5% |
| Movement Range | Horizontal: 22 cm, Vertical: 15 cm |
| Number Of Axes | 2 |
| Range | Approx. 10 cm |
| Weight | 169 g |
| Body Dimensions | 44.2×22.6×28.6 mm |
| Transmission Ratio | 512:1 |
| Operation Modes | Angle mode, Speed mode |
| Port Type | IO, AD |
| Number Of Ports | 2 |
| Output | Port: 12.6 V=0.8A or 12.6 V=2.2A |
| Chassis Speed Range | 0-3.5 m/s (forward)0-2.5 m/s (backward)0-2.8 m/s (sideways) |
| Input | 100-240 V, 50-60Hz, 1A |
| Max Still Photo Resolution | 2560×1440 |
| Max Video Resolution | FHD: 1080/30fpsHD: 720/30fps |
| Max Video Bitrate | 16 Mbps |
| Photo Format | JPEG |
| Video Format | MP4 |
| Sensor | CMOS 1/4″; Effective pixels: 5 MP |
| Operating Temperature Range | -10 to 40 °C |
| Detection Requirements | For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°. |
| Maximum Detection Frequency | 15 Hz |
| Dimensions | 320×240×270 mm (length × width × height) |
| Supported SD Cards | Supports microSD cards with a capacity up to 64GB |
Be the first to review “DJI RoboMaster S1 Education Expansion Set (EP)”
Related products
Drone Accessories
Drone Accessories
Reviews
There are no reviews yet.