The 3 Legged Thing – Pro 2.0 Leo & AirHed Pro Bronze available at digiDirect is a combination of the Tripod and Ball Head, AirHed Pro Lever Ball Head and the QR-OCTA Quick Release Plate and presents excellent value.
Contact digiDirect today or continue reading to learn more
Perhaps you have a few more questions about this package? We’re here to help. We have a large stock of professional and recreational cameras available. Our staff can help you pick out the perfect device to suit your needs without breaking your budget. You can contact us today to learn more or read more about the individual components of this package below.
This bronze and blue 3 Legged Thing – Pro 2.0 Leo & AirHed Pro Bronze includes a bronze Leo 2.0 Tripod and blue AirHed Pro Lever Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable centre column. With the ball head, each leg can be configured as a monopod with up to a 364.2cmΒ height or can be combined with the centre column to form a monopod with up to 150.3cmΒ in height.
Key Features of the 3 Legged Thing – Pro 2.0 Leo & AirHed Pro Bronze
- For added versatility, the Leo 2.0 Tripod’s three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod
- A carry bag with a strap is provided for storage and transport.
Tripod and Ball Head
Tripod heads such as the AirHed Pro Lever Ball Head that are compatible with a 3/8″-16 mount can be connected to the top of the Leo 2.0 Tripod. When combined and configured as a tripod, the Leo 2.0 Tripod and AirHed Pro Lever Ball Head supports up to 29.93cmΒ and measures 37.3 cmΒ when folded. Each of the tripod’s 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Leo 2.0 Tripod and AirHed Pro Lever Ball Head can be set at a minimum height of 20.8cmΒ when the tripod’s 2-section, push-and-pull rapid centre column is removed. Together, the three legs can be extended to obtain a maximum height of 112cmΒ or 146.5cmΒ with the centre column fully raised along with the ball head. Each of the carbon fibre legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.
Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations.
By loosening the ball head’s primary locking knob, the head’s ball-and-socket joint can be quickly swivelled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360Β°.
Key Features of the Tripod and Ball Head
- The arca-type ball head and carbon-fibre tripod with 3/8″-16 mount
- Tripod features three detachable legs and a removable centre column
- With a ball head, each leg can be configured as a monopod with up to a 110.2cmΒ height or can be combined with the centre column to form a monopod with up to 150.3cmΒ height
- Tripod configuration with ball head supports up to 29.9 kgs
- Push-and-pull centre column for rapid camera, lens, or sport optic positioning
- Center column D-ring to accommodate ballast for additional stability
- Can be set for a minimum height of 55 cmΒ or 20.8 cmΒ without the centre column
- With a ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 112 cmΒ or 146.5cmΒ with the centre column fully raised
- The Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod’s legs instead of above them
- Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
- Legs can be locked at 22, 55, or 80Β° angles
- Rubber feet help to enhance stability on a wide variety of surfaces
- Weighs 1.8 kgsΒ and measures 37.3cmΒ when all three legs are reversed 180Β° and folded
- Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
- Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
- 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
- Ball head microfiber bag
- Tripod kit carry bag with a strap for storage and transport
AirHed Pro Lever Ball Head
.Arca-type ball head with 40 kgsΒ load capacity. Compatible with tripods or support systems that feature a 3/8″-16 mount. Uses a ball-and-socket joint to help maximize pan-and-tilt flexibility. The ball-and-socket joint provides 360Β° of swivel control, is tiltable down to a 90Β° angle, and can be locked into place. A large primary locking knob with knurled surface allows the ball-and-socket joint to be quickly swivelled, angled, fully tilted, or returned to its upright position.
Key Features of the AirHed Pro Lever Ball Head
- A secondary locking knob with knurled surface allows the head to rotate 360Β°
- Integrated clamp on top of the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
- Push-and-pull cam lock lever to secure compatible Arca-type quick release plates within the integrated clamp
- When opened, the cam lock lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever’s motion best suits either a right or left-handed user
- Built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations
- Durable magnesium alloy construction
QR-OCTA Quick Release Plate
The AirHed Pro Lever Ball Head is an Arca-type ball head with a load capacity of 40 kgs and can be attached to tripods or other support systems that feature a 3/8″-16 mount. Cameras or accessories that are compatible with a 1/4″-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick-release plate can be attached or removed from the integrated clamp located at the top of the head’s ball-and-socket joint by using the clamp’s push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever’s motion best suits either a right- or left-handed user.
Key Features of the QR-OCTA Quick Release Plate
- Compatible with Arca-type quick release clamps
- 1/4″-20 mount
- Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Lever Ball Head
- Durable, aluminium alloy construction
- MPN – 3LT-LEOKIT2
- GTIN – 5060244885448




































Reviews
There are no reviews yet.