3 Legged Thing Legends Mike & AirHed Cine Standard Kit

The 3 Legged Thing Legends Mike & AirHed Cine Standard Kit includes the 3 Legged Thing Mike carbon fibre tripod legs and AirHed Cine-S fluid head, which features a standard video-style sliding baseplate. The flat base head features a fixed pan and tilt drag and fits on top of the tripod legs with a levelling base that has integrated fluid drag adjustments. The system has a height range of 23cm to 157cm and supports up to 9.9cm of camera and camera rig.

This combination allows you to quickly compensate for uneven surfaces using the tripod legs levelling base. The system features a total of 3 bubble levels, and the flat base of the AirHed allows the fluid head to sit lower than if it were a bowl base fluid head when mounted on other platforms such as sliders and car mounts. The Mike tripod legs feature eight-layer carbon fibre construction and each leg can detach from the levelling base to be used as a monopod or boom arm. Optional accessories allow you to turn the levelling base into a Hi-Hat to get remarkably low angle shots with the AirHed Cine.

Key Features of the 3 Legged Thing Legends Mike & AirHed Cine Standard Kit

• Robust Flat Base Fluid Video Head
• 23cm to 157cm Height Range, 10 kgs   Payload
• 3-Section Carbon Fiber Legs
• Standard Video-Style Plate

3 Legged Thing Mike Carbon Fiber Tripod Legs with Quick Leveling Base

The 3 Legged Thing Mike Carbon Fiber Tripod Legs with Quick Leveling Base is part of the Legends range and is for flat-base tripod heads with either a 1/4″-20 or 3/8″-16 threaded mounting hole. It is a carbon fibre levelling-base tripod, with friction control on the underside to finely adjust the position of the levelling base. The 3-section removable legs have a height range of 13cm to 147cm and are made from eight layers of carbon fibre and feature twist-lock leg locks with an improved shim system for greater strength.

Key Features of the 3 Legged Thing Mike Carbon Fiber Tripod Legs with Quick Leveling Base

• Maximum Working Height: 147.5 cm
• Load Capacity: 14 kg
• Folded Length: 66.7 cm
• Head Mount Type: 1/4″-20 Male, 3/8″-16 Male

3 Legged Thing AirHed Cine-S with Standard Video Plate

The compact, yet robust, 3 Legged Thing AirHed Cine-S with Standard Video Plate weighs less than 1.25 pounds and can support cameras and rigs weighing up to 10 kgs. The head has a fixed fluid drag system and fixed counterbalance, with 165° of tilt and 360° of pan rotation for smooth camera moves. There are separate pan and tilt lock levers for locked-off shots, and the pan axis is indexed for repeatability.

The included plate features a locating pin and both 1/4″-20 and 3/8″-16 camera tie-down screws and has a sliding range of 10cm. The AirHed Cine-S accepts standard video-style quick-release plates, making it easy to find spares or replacements. The integrated bubble levels aid in setting up level horizons. The adjustable pan handle can be mounted onto either side of the video head using the built-in ARRI-compatible rosettes. The AirHed Cine-S can be mounted on ball adapters, tripods, and another camera supports via the 3/8″-16 threaded female receiver on the magnesium alloy flat base.

Key Features of the 3 Legged Thing AirHed Cine-S with Standard Video Plate

• The pan axis is indexed with markings from 0 to 180 on each side of the base
• The sliding balance plate features a sliding range of 10c,
• A 1/4″-20 accessory mounting hole on the side of the head is useful for attaching monitor arms or French Flags
• Material: Magnesium

• MPN – 3LT-MIKEKIT-S
• GTIN – 5056085300288